The first thing you need to do is determine that the issue is certainly related to
the printer’s consumables which are the HP 2600 laserjet toner cartridges. Your efforts will only be wasted even if
you tried all of these recommended solutions, yet the root cause was not
actually from the cartridges. In case you’re pretty sure, here
are some solutions you might want to try with your printer to fix print quality
problems.
Before you get down to the most
complex conclusions, why not try inspecting the cartridges installed in your
machine. Remove them inside the printer and try to examine each color to verify
that there are no defects or dents on surface. Also check the imaging drum, if
it’s not damaged, maybe there are dust or toner that clings on the green
roller. Once you’re done checking all the supplies, just give a gentle shake
before re-installing them back to the machine.
When did you replace the
printer’s consumables? Perhaps their expected life is near to end. How can you
check the status of your machine’s toner cartridges? If that’s your question,
well actually there’s a built-in option for users to check the status of their
printer’s supplies through the Control Panel. We know you don’t give much importance
to that Setup button found in your machine’s panel, but now you need its help.
Read through below to learn how you can have a printed copy of the cartridges
current status.
- Turn the machine ON, and from the control panel, hit the Setup button.
- A list should appear, and from there you have to select Reports through the arrows keys. Press OK to proceed on the next page.
- Again browse through the list and select Supplies Status Page, followed by pressing the OK button.
In less than a minute the machine
should start printing a report page. These includes the remaining percent of
toner in each cartridge, pages printed, date installed and last used, plus the
serial number in case you need to buy new replacements.
Run a Maintenance Test Print or
the Cleaning Mode feature to remove any excessive dirt such as dust, toners and
paper pieces that accumulated inside the machine especially on its paper path.
To clean the printer, again hit
the Setup button, select Services from the list, then select Cleaning Mode and
press OK.
A prompt should appear in case
the input tray is empty of paper sheets. Load some and clear the prompt by
pressing OK once more.
While the unit is running the
cleaning process, it will take a few minutes to be completed. Do not turn the
unit OFF, just wait until a page comes out from the output tray indicating that
the machine is done.
Usually I never comment on blogs but your article is so convincing that I never stop myself to say something about it. You’re doing a great job Man,Keep it up. Meanwhile visit our website for amity project synopsis