The HP 3700 printer is a digital
workgroup printing device designed to deliver high printing performance and
excellent quality output to improve the productivity of any working
environment. Unlike other digital laser printers though, the HP 3700 printer
along with 3700dn, Color 3700dtn and Color 3700n printers have several printer
consumables to use such as its HP 3700 toner
cartridges (HP 311A toner cartridges): HP Q2681A cyan, HP Q2682A yellow, HP
Q2683A magenta and HP Q2670A black laser toner cartridges, then there’s the
fuser kit which needs to be replace once in a while to improve the print
quality of your printer. An end user should also replace its pickup roller to
avoid any printer problems or print quality issues.
And for today’s article, we will
provide end users or HP 3700 printer users the steps on how they can maintain
their printer’s quality through replacing the fuser and the pickup roller.
Remember that is it necessary for these parts to be replaced once in a while
for your printer not to deteriorate and for it to work properly. These
procedures are from HP
Solutions Center:
Replacing the Fuser
- Turn the printer off.
- Open the lower rear door (rear output bin).
- Slide out the lower rear door (rear output bin) tray extender.
- Lift and pull the lower rear door (rear output bin) while using a finger to press the tab with ridges on the left side of the door. Remove the lower rear door (rear output bin).
- Place thumbs on the blue ridges (near the warning label) and, using fingers, pull up on the blue latches.
- Pull the fuser out of the printer.
- Remove the new fuser from the bag.
- Hold the fuser with thumbs on the blue ridges and fingers on the blue latches. Push both sides of the fuser into the printer.
- Press the black ridges on the front of the fuser until the fuser clicks into place.
- Rotate the green levers to the up position.
- To reattach the lower rear door (rear output bin), hold the door at a 45ยบ angle, and fit the peg into the round hole on the right side.
- Press the ridges on the tab on the left side of the door, and fit the peg into the round hole.
- Close the lower rear door (rear output bin).




.jpg)
