The HP Color Laserjet CP4005
Series Printers includes two digital laser printer designed to deliver
outstanding color quality printouts and workhorse printing capabilities to
small and medium businesses and workplace. This includes the HP Color LaserJet
CP4005n and the HP Color LaserJet CP4005dn which both uses replacement printer
cartridges, HPCP4005 toner cartridges: HP CB400A, HP CB401A, HP CB402A and HP CB403A
laser toners. And for today’s article, we’re going to give maintenance tips on
how you should replace the toner cartridges in your HP Color Laserjet CP4005
Series Printers.
These following instructions are
from HP own Support Center which was provided by them to help users have an
easy job on maintaining their printer.
Replace Printer Cartridges in HP Color Laserjet CP4005
- Step 1 - Lift the top cover of the printer. Caution: Make sure that the printer had been idle so
the fuser is not hot.
- Step 2 - Pull down the front cover and transfer unit. Note: Do not place any item on the transfer unit while it is open. If the transfer unit is punctured, print quality problems could result.
- Step 3 - Remove the used print cartridge from the printer.
- Step 4 - Remove the new print cartridge from the bag. Place the used print cartridge in the bag for recycling.
- Step 5 - Align the print cartridge with the tracks inside the printer and insert the cartridge until it is completely seated.
- Step 6 - Close the front cover and then close the top cover. After a short while, the control panel should display Ready.
- Step 7 - Installation is complete. Place the used print cartridge in the box in which the new cartridge arrived. See the enclosed recycling guide for recycling instructions.
- Step 8 - If you are using a non-HP print cartridge, it is advisable to cold reset the printer.
By performing cold reset to your
printer, this will stop the error messages you’re getting from installing
non-genuine hp supply. This will also let your printer recognize the
alternative replacement cartridge you have used. To cold reset your HP Color
Laserjet CP4005 Series Printer, follow these steps:
- Step 1 – Turn the printer off.
- Step 2 – Turn the printer on.
- Step 3 – When display shows rapidly changing numbers, hold Checkmark button. When all lights turn on, release button.
