How to Replace Brother TN450 Toner in Brother DCP-7060D

The Brother DCP-7060D is a compact laser multifunction copier which features auto-duplex printing for easily producing professional two-sided output. It is described by its manufacturer Brother Industries as “is an affordable multi-function copier that is great for making quick copies or printing text-based documents.” It is engineered with advanced features that allow you to allow you to scan documents to a file, image, E-mail or OCR. And it also help lower your operating costs, by offering a high-page yield replacement printer cartridge, the Brother TN450 toner cartridge.

And if you own a Brother DCP-7060D or more probably using it in the office, then you might want to know how you to install the high page-yield Brother TN450 toner cartridge in your Brother laser printer. This article will provide such instruction credits to Brother Center Solutions.

Once the printer notifies you with a message “REPLACE TONER”, this indicates that the toner cartridge installed in your Brother laser printer is already out of toner and needs to be replaced.

Steps to Replace Brother TN450 Toner in Brother DCP-7060D

• Step 1 – Make sure that the Brother DCP-7060D laser printer is turned on.
  
• Step 2 – Open the front cover and leave the machine turned on for 10 minutes to cool down so you can avoid yourself from being burn by any hot components inside the printer.
• Step 3 – Take out the drum unit and toner cartridge assembly by holding your Brother machine with one hand and holding the drum unit with the other hand.  Pull the drum unit toward you and lift it up.
• Step 4 – Push down the green lock lever and take the toner cartridge out of the drum unit.
• Step 5 – Unpack the new toner cartridge. Hold the cartridge level with both hands and gently shake it from side to side several times to spread the toner evenly inside the cartridge.
• Step 6 – Pull off the protective cover.
• Step 7 – Put the new Brother TN450 toner cartridge firmly into the drum unit until you hear it lock into place. If you put it in properly, the green lock lever will lift automatically.
• Step 8 – Clean the primary corona wire inside the drum unit by gently sliding the green tab from left to right and right to left several times.
• Step 9 – Put the drum unit and toner cartridge assembly back into the machine. Close the front cover.

After these steps, make sure to do some printing tests on your laser printer to guarantee that the toner cartridge is properly installed.